Ford 2004 Ranger v.2 User Manual download pdf (Page 209)

5. Shift to P (Park) and leave the engine running.

6. Remove the dipstick, wipe clean with a dry lint free rag.

7. Install and fully seat the dipstick into the filler tube.

8. Remove the dipstick and inspect

the fluid level. Level should be in

the cross-hatched area.

9. If necessary, add fluid in 250ml (1/2 pint) increments through the filler

tube until the level is correct at normal operating temperatures. Refer to

the Lubricant specifications section in this chapter for the correct fluid

type. The use of any other non-approved fluid may cause internal

transmission damage.

10. Fluid can be checked at ambient

temperatures between 10–30°C

(50–95°F). DO NOT ADD fluid until

the transmission is at normal

operating temperatures or the transmission will be overfilled.

Low fluid level

Do not drive the vehicle if the fluid

level is at or below the bottom of

the dipstick.

High fluid level

Fluid levels above the safe range

may cause overheating, shift and/or

engagement concerns and internal

transmission damage. If an overfill

condition occurs, excess fluid should

be removed by a qualified technician.

2004 Ranger (ran)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

209

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 247 248

No comments

Ford 2004 Ranger v.2 User Manual Page 209