Ford 2000 E-150 User Manual download pdf (Page 191)

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the OFF position.

2. Open the hood.

3. Remove two screws and pull lamp assembly away from the vehicle.

4. Rotate the bulb socket

counterclockwise and remove.

5. Carefully pull out the bulb

straight out of the socket and push

in new bulb.

To complete installation, follow the

removal procedures in reverse order.

Replacing high-mount brakelamp bulbs

The interior cargo lamp (if equipped) will have to be removed from

under the high-mount brakelamp assembly located inside the vehicle.

To change the high-mount

brakelamp bulbs:

1. Remove the two screws from the

high-mount brakelamp assembly.

2. Remove the bulb from the lamp

assembly by turning

counterclockwise.

3. Carefully pull the bulb straight

out of the socket and push in the

new bulb.

4. Install bulb socket in lamp assembly by turning clockwise.

5. Install brakelamp assembly on the vehicle with two screws.

Maintenance and care

191

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 231 232

No comments

Ford 2000 E-150 User Manual Page 191