Ford 2005 Mustang v.3 User Manual download pdf (Page 34)

Headlamp vertical aim adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,

approximately 25 feet (7.6 meters) away.

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp to the

ground and mark an 8 foot

(2.4 meter) horizontal reference line

on the vertical wall or screen at this

height (a piece of masking tape works well). The center of the lamp is

marked by a 3.0 mm circle on the headlamp lens.

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood.

4. On the wall or screen you will

observe a flat zone of high intensity

light located at the top of the beam

pattern.

5. If the top edge of the high

intensity light zone is not at the

horizontal reference line, the

headlamp will need to be adjusted.

6. Locate the vertical adjuster on

each headlamp, then usea7mm

Allen wrench or a Phillips

screwdriver to adjust the headlamp

up or down.

7. HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NON-ADJUSTABLE.

8. Close the hood and turn off the

lamps.

2005 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 247 248

No comments

Ford 2005 Mustang v.3 User Manual Page 34