Ford 2007 Freestar v.1 User Manual download pdf (Page 292)

POWER STEERING FLUID

Check the power steering fluid.

Refer to the scheduled maintenance

guide for the service interval

schedules. If adding fluid is

necessary, use only MERCON威 ATF.

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be

near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN

and MAX lines. Do not add fluid if the level is within this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the correct operating range. Be sure to put the

cap back on the reservoir.

BRAKE FLUID

The fluid level will drop slowly as

the brakes wear, and will rise when

the brake components are replaced.

Fluid levels between the “MIN” and

“MAX” lines are within the normal

operating range; there is no need to

add fluid. If the fluid levels are

outside of the normal operating

range the performance of your

brake system could be

compromised; seek service from

your authorized dealer immediately.

2007 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

292

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 311 312

No comments

Ford 2007 Freestar v.1 User Manual Page 292