Ford 2004 Mustang v.2 User Manual download pdf (Page 66)

5. Turn the ignition from the 3 (OFF) position to the

4 (ON) position. Keep the ignition in the 4 (ON)

position for at least one second but not more than

10 seconds.

6. Turn the ignition to the 3 (OFF) position, and

remove the second key from the ignition.

7. Within twenty seconds of removing the previously

programmed coded key, insert the unprogrammed

key (new/valet key) into the ignition.

8. Turn the ignition from the 3 (OFF) position to the

4 (ON) position. Keep the ignition in the 4 (ON)

position for at least one second.

9. Your new unprogrammed key is now programmed.

If the key has been successfully programmed it will

start the vehicle’s engine and the theft indicator light

will illuminate for three seconds and then go out. If

the key was not successfully programmed, it will not

start your vehicle’s engine and the theft indicator

light will flash on and off rapidly. If failure repeats,

bring your vehicle to your dealer to have the new

key(s) programmed.

To program additional new unprogrammed key(s),

repeat this procedure from Step 1 for each

additional key.

2004 Mustang (mus)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 136 137

No comments

Ford 2004 Mustang v.2 User Manual Page 66