Ford 2007 Crown Victoria v.3 User Manual download pdf (Page 44)

3. Remove two retainers and pull

headlamp assembly forward to

expose bulb.

4. Disconnect the electrical

connector from the bulb by pulling

rearward.

5. Remove the bulb retaining ring by

rotating it counterclockwise (when

viewed from the rear) to free it

from the bulb socket, and slide the

ring off the plastic base. Keep the

ring to retain the new bulb.

6. Without turning, remove the old

bulb from the lamp assembly by

gently pulling it straight back out of

the lamp assembly.

To install the new bulb:

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

1. With the flat side of the new bulb’s plastic base facing upward, insert

the glass end of the bulb into the lamp assembly. Turn the bulb left or

2007 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 271 272

No comments

Ford 2007 Crown Victoria v.3 User Manual Page 44