Ford 2007 Crown Victoria v.3 User Manual download pdf (Page 54)

4. Determine which magnetic zone

you are in by referring to the zone

map.

5. Repeatedly press and release the

RESET button to scroll through the

zones 1–15 until the desired zone is

displayed.

6. Press the MODE button to save

the new zone setting and return to

the compass normal mode.

Note: The compass exits the zone

setting mode and returns to its previous setting after one minute of no

activity.

Note: If power is interrupted during the zone setting process, the

compass resets to the same zone it was set to before the zone change

process was started.

Calibration mode

For optimum calibration, turn off all electrical accessories (heater/air

conditioning, wipers, etc.) and make sure all vehicle doors are shut.

To calibrate the compass:

1. Press and release the MODE

button until the compass directional

heading is displayed.

2. Hold down the MODE button for

10 seconds to enter the calibration

mode. The display will read PRESS

RESET TO DECAL.

3. Release the MODE button.

123

6 7 8 9 1011

2007 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 271 272

No comments

Ford 2007 Crown Victoria v.3 User Manual Page 54