Ford 2008 F-150 v.1 User Manual

Introduction 4Instrument Cluster 12Warning lights and chimes 12Gauges 20Entertainment Systems 23How to get going 23AM/FM stereo 27AM/FM stereo with CD

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

3. Carefully pull the lamp assemblystraight rearward from the tailgatepillar to disengage two hiddensnap-in retainers. (Flare side taillamps are not e

Replacing license plate lamp bulbsThe license plate bulbs are locatedbehind the rear bumper. To changethe license plate lamp bulbs:1. Reach behind the

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

TILT STEERING WHEEL (IF EQUIPPED)Pull the lever down to unlock thesteering column. While the lever isin the down position, tilt thesteering column to

CENTER CONSOLE (IF EQUIPPED)The center console offers several useful storage features. These include:1. Cupholders2. Tissue holder in lid3. Power poin

Storage compartmentPress the release on the door toopen the storage compartment.The storage compartment may beused to secure sunglasses or asimilar ob

Bin RemovalAttach and remove bins from the rail using the following instructions:Place both palms on the underside of the storage bin, avoiding thesto

While pushing upwards with palms, grip the side latches with fingers andsqueeze.With pressure applied with palms and side latches squeezed down, pulld

AUXILIARY POWER POINT (12VDC)Power outlets are designed for accessory plugs only. Do not insertany other object in the power outlet as this will damag

Cigarette/Cigar lighter (if equipped)Do not plug optional electrical accessories into the cigarette lightersocket.Do not hold the lighter in with your

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

POWER WINDOWS (IF EQUIPPED)Do not leave children unattended in the vehicle and do not letchildren play with the power windows. They may seriously inju

Note: The rear window switches will not illuminate when the windowcontrol is in the LOCKED position.Press the right side to restore the window control

Automatic dimming interior rear view mirror (if equipped)Your vehicle may be equipped withan interior rear view mirror that hasan auto-dimming functio

Telescoping trailer tow mirrors (if equipped)The telescoping feature allows themirror to extend approximately3.5 inches (90 mm). This feature isespeci

Heated outside mirrors (if equipped)Heated mirrors remove ice, mist andfog. To activate the heated mirrors,press the rear defrost buttonRlocated on th

Never adjust the accelerator and brake pedal with feet on thepedals while the vehicle is moving.SPEED CONTROL (IF EQUIPPED)With speed control set, you

Resuming a set speedPress the RES/RESUME control andrelease it. This will automaticallyreturn the vehicle to the previouslyset speed.Increasing speed

• Depress the brake pedal until thedesired vehicle speed is reached,press the SET control.Turning off speed controlThere are two ways to turn off the

Audio control featuresPressto select:• AM, FM1, FM2 (if equipped)• CD (if equipped)• FES/DVD (if equipped)• SAT1, SAT2 or SAT3 (SatelliteRadio mode if

Press FAN + or - to adjust fanspeed.MOON ROOF (IF EQUIPPED)The moon roof control is located on the overhead console.Do not let children play with the

WARNING LIGHTS AND CHIMESBase instrument clusterBase with Tachometer instrument cluster2008 F-150 (f12)Owners Guide (post-2002-fmt)USA (fus)Instrument

The moon roof has a built-in sliding shade that can be manually openedor closed when the glass panel is shut. To close the shade, pull it towardthe fr

1. Position the end of yourhand-held transmitter 1–3 inches(2–8 cm) away from the HomeLink威button you wish to program (locatedon your visor) while kee

Gate Operator & Canadian ProgrammingDuring programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time for

Erasing HomeLink姞 buttonsTo erase the three programmedbuttons (individual buttons cannotbe erased):• Press and hold the two outerHomeLink威 buttons unt

Usually, when something affects the compass readings, the compass willcorrect itself after a few days of operating your vehicle in normalconditions. I

1. Start the vehicle.2. To enter the compass calibrationmode, press and hold the button forgreater than eight seconds. Thedisplay will then show CAL i

• Average Fuel Economy• Trip Elapsed Drive TimeOdometer/Trip odometerRefer to Gauges in the Instrument Cluster chapter.Compass displayThe compass read

6. Press the RESET, then pressSETUP control repeatedly until thecorrect zone setting for yourgeographic location is displayed onthe message center. Th

DTE is calculated using a running average fuel economy, which is basedon your recent driving history of 500 miles (800 km). This value is notthe same

Setup menuPress this control for the followingdisplays:• System Check• Units (English/Metric)• Autolock• Autolamp Delay• LanguageSystem checkSelecting

Family Carrier instrument clusterMid instrument cluster2008 F-150 (f12)Owners Guide (post-2002-fmt)USA (fus)Instrument Cluster13

1. To disable/enable the autolockfeature, select this function from theSETUP control for the currentdisplay mode.2. Press the RESET control to turnthe

The message center will display the last selected feature if there are nomore warning messages. This allows you to use the full functionality ofthe me

CHECK ENGINE TEMPERATURE. Displayed when the enginecoolant is overheating. Stop the vehicle as soon as safely possible, turnoff the engine and let it

CHECK FUEL CAP. Displayed when the fuel filler cap is not properlyinstalled. Check the fuel filler cap for proper installation. Refer to Fuelfiller ca

POSITIVE RETENTION FLOOR MATDo not install additional floor mats on top of the factory installedfloor mats as they may interfere with the accelerator

Tailgate removalYour tailgate is removable to allow more room for loading.Note: If equipped with a Reverse Camera System (RCS), do steps 1through 3 be

BED EXTENDER (IF EQUIPPED)Your vehicle may be equipped with a bed extender designed to extendthe pickup box for larger loads.To extend the bed extende

To remove the bed extender:1. Extend the bed extender.2. Pull the lever on each side of thebed extender to unlock it.Make sure the locking clip screws

Cargo rail package: The strong extruded aluminum double channelrails and four adjustable cleats are designed to hold loads up to 600 lb(272 kg) per cl

Front header bar: Spans the header area of the pickup box, providingthe function of a header rail.• Attachment cleats from side rails or other attachm

Luxury instrument clusterLimited instrument cluster2008 F-150 (f12)Owners Guide (post-2002-fmt)USA (fus)Instrument Cluster14

Cross bars: Aluminum cross bars with T-slot channels in all four sides,and a latch mechanism that allows the end supports to snap over theexisting cle

Bed divider: This panel will keep small items up to 400 lb (180 kg) inposition in the pickup box. Also includes T-slots to allow attachment ofindustry

Side mounted tool bins: Watertight bins can be positioned at any pointalong the side rails and can be easily removed (even when full), andcarried to w

will allow the handles to stick up above the lid (with the lid closed).After closing the lid, simply lift up and inboard away from the pickupbox side

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

Autolock (if equipped)The autolock feature is available on automatic transmission vehicles withpower locking. This feature will lock all the doors whe

Conversely, a horn chirp followed by a honk will indicate the system isenabled. Pressing thecontrol then the control will turn thefeature ON if it was

REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to the fol

2. Press and release again within three seconds to confirm that all thedoors are closed and locked. Note: The doors will lock again, the hornwill chir

Sounding a panic alarmPressto activate the alarm. Press again or turn the ignition to 2(ACCESSORY) or 3 (ON) to deactivate.Note: The panic alarm will

Harley-Davidson instrument clusterWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repa

To replace the battery:1. Twist a thin coin between the twohalves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIR

Programming remote transmittersIt is necessary to have all (maximum of six — original and/or new) ofyour remote transmitters available prior to beginn

• the remote transmitter lock control is pressed, or• after 25 seconds of illumination.The dome lamp control (if equipped) must not be set to the off

4. Within five seconds, press the control two times. Note: One hornchirp should be heard, indicating the system has been disabled.Conversely, a horn c

• one minute of keypad inactivity.• thecontrol is pressed on the remote entry transmitter.• the ignition is turned from the 1 (OFF/LOCK) position to t

SECURILOCK™ PASSIVE ANTI-THEFT SYSTEMSecuriLock™ passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent

Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the1 (OFF/LOCK) position.Automatic disarmingSwitching the ignition to

1. Insert the first previouslyprogrammed coded key into theignition and turn the ignition fromthe 1 (OFF/LOCK) position to the3 (ON) position (maintai

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Front seat• Lift the track release bar to movethe seat forward or rearward.Make sure that the seat isrelatched into place.• Pull the release lever han

Under engine misfire conditions, excessive exhaust temperaturescould damage the catalytic converter, the fuel system, interiorfloor coverings or other

Adjusting the front power seat (if equipped)Never adjust the driver’s seat or seatback when the vehicle ismoving.Do not pile cargo higher than the sea

The control is located on the outboard side of the seat cushion.Press the front or rear portion to tiltthe seat.Press the control to move the seatforw

Heated seats (if equipped)Persons who are unable to feel pain to the skin because ofadvanced age, chronic illness, diabetes, spinal cord injury,medica

The head restraints can be movedup and down. Lift the head restraintso that it is located directly or asclose as possible behind your head.Push contro

Returning the seat to seating positionBefore returning the seatback to its original position, make surethat cargo or any objects are not trapped under

classification and conditions. A collection of crash and occupant sensorsprovides information to the Restraints Control Module (RCM). During acrash, t

and they move forward during pre-crash braking. The most effective wayto reduce the risk of unnecessary injuries is to make sure all occupantsare prop

Front outboard safety belt energy management retractorsThe front outboard safety belt energy management retractors allowwebbing to be pulled out of th

Never let a passenger hold a child on his or her lap while thevehicle is moving. The passenger cannot protect the child frominjury in a collision.All

Combination lap and shoulder belts1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until

Anti-lock brake system: If theABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected, have the systemserviced immediately by

2. Insert the belt into the clip on theback panel. Protect the stowed beltif you carry cargo this may damageor soil the belt.If the belt has been disc

shortened, but pinches the webbing to keep the lap portion from gettinglonger. The cinch tongue is designed to slip during a crash, so alwayswear the

Each seating position in your vehicle has a specific safety beltassembly which is made up of one buckle and one tongue thatare designed to be used as

Shorten and fasten the belt whennot in use.Energy management retractorsYour vehicle has a safety belt system equipped with energy managementretractors

When to use the automatic locking mode• Anytime a child safety seat is installed in a front outboard passengerin a Regular Cab/ SuperCab/ SuperCrew or

2. Grasp the shoulder portion andpull downward until the entire beltis extracted.3. Allow the belt to retract. As the belt retracts, you will hear a c

The driver and front outboard passenger safety belt pretensioners aredesigned to activate only during certain frontal or near-frontal collisionswith s

Front safety belt height adjustment (if equipped)Your vehicle has safety belt heightadjustments for the driver and rightfront passenger. Adjust the he

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

The Belt-Minder威 feature uses two different warning chimes. During thefirst minute of activation, the warning chime will sound once everysecond. The r

Overdrive off (if equipped):Illuminates when the overdrivefunction of the transmission hasbeen turned off, refer to theDriving chapter. If the light d

The following are reasons most often given for not wearing safety belts:(All statistics based on U.S. data)Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

While the design allows you to deactivate your Belt-Minder威, thissystem is designed to improve your chances of being safelybelted and surviving an acc

Do not use extensions to change the fit of the shoulder beltacross the torso.Safety belt maintenanceInspect the safety belt systems periodically to ma

outboard passenger from certain upper body injuries. The term“supplemental restraint” means the airbags are intended as a supplementto the safety belt

The National Highway Traffic Safety Administration (NHTSA)recommends a minimum distance of at least 10 inches (25 cm)between an occupant’s chest and t

Additional equipment may affect the performance of the airbagsensors increasing the risk of injury. Please refer to the BodyBuilders Layout Book for i

How does the airbag supplemental restraint system work?The airbag SRS is designed toactivate when the vehicle sustainssufficient longitudinal decelera

If the airbag has deployed, the airbag will not function againand must be replaced immediately. If the airbag is notreplaced, the unrepaired area will

The front passenger sensing system will disable (will not inflate) thefront passenger’s frontal airbag if:• the front passenger seat is unoccupied, or

MINI MESSAGE CENTER WARNING DISPLAYS (IF EQUIPPED)Door ajar: Displays when theignition is in the ON position andany door is open.Low fuel: Displays wh

• When the front passenger sensing system enables the front passengerfrontal airbag (may inflate), the indicator will be unlit and stay unlit.If a per

The front passenger sensing system may detect small or medium objectsplaced on the seat cushion. For most objects that are in the frontpassenger seat,

SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag suppleme

Child booster seatsChildren outgrow a typical convertible or toddler seat when they weigh40 lb. (18 kg) and are around 4 years of age. Although the la

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thisconditio

SAFETY SEATS FOR CHILDRENChild and infant or child safety seatsUse a safety seat that is recommended for the size and weight of thechild. Carefully fo

tether anchors. For more information on top tether straps and anchors,refer to Attaching safety seats with tether straps in this chapter. Formore info

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a

Locks and Security 144Keys 144Locks 144Anti-theft system 155Seating and Safety Restraints 158Seating 158Safety restraints 164Airbags 183Child restrain

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

Installing child safety seats in cinch tongue combination lap andshoulder belt seating position(Regular Cab Center seating position Only)If you are us

Rear facing child seats should NEVER be placed in front of anactive airbag.3. Slide the tongue up the webbing.4. While holding both shoulder andlap po

6. While pushing down with yourknee on the child seat pull up onthe shoulder belt portion to tightenthe lap belt portion of thecombination lap and sho

2. Place the child safety seat in the center seating position.3. Route the tongue and webbing through the child seat according to thechild seat manufa

• F150 Regular Cab• F150 SuperCrew and SuperCabFront seat tether strap attachment1. Position the child safety seat on the seat cushion.2. Route the ch

• Front seat Regular Cab center(located on back panel)If the tether strap is clippedincorrectly, the child safetyseat may not be retained properlyin t

Rear seat tether strap attachmentThere are three loops of webbingjust above the back of the rear seat(along the bottom edge of the rearwindow) in the

3. Install the child safety seat tightlyusing the LATCH anchors or safetybelts. Follow the instructions in thischapter.4. Tighten the tether strapacco

The lower anchors for child seatinstallation are located at the rearsection of the seat between thecushion and seat back. The LATCHanchors are below t

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e

Odometer: Registers the total miles (kilometers) of the vehicle.• With Mini Message Center• With Full Message CenterRefer to Message Center in theDriv

Power is supplied to all four wheels through a transfer case or powertransfer unit. 4WD vehicles allow you to select different drive modes asnecessary

• Narrower — to provide greatermaneuverability in tight spaces,particularly in off-road use.As a result of the above dimensionaldifferences, SUV’s and

government test course. For example, a tire graded 150 would wear oneand one-half (1 1/2) times as well on the government course as a tiregraded 100.

• Tire Identification Number (TIN): A number on the sidewall ofeach tire providing information about the tire brand andmanufacturing plant, tire size

At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflateall

To check the pressure in your tire(s):1. Make sure the tires are cool, meaning they are not hot from drivingeven a mile.If you are checking tire press

cracking, cuts, bruises and other signs of damage or excessive wear. Ifinternal damage to the tire is suspected, have the tire demounted andinspected

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

When mounting replacement tires and wheels, you should notexceed the maximum pressure indicated on the sidewall of thetire to set the beads without ad

• Do not run over curbs or hit the tire against a curb when parkingIf your vehicle is stuck in snow, mud, sand, etc., do not rapidlyspin the tires; sp

Battery voltage gauge: Indicatesthe battery voltage when theignition is in the ON position. If thepointer moves and stays outside thenormal operating

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can

INFORMATION CONTAINED ON THE TIRE SIDEWALLBoth U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the

7. H: Indicates the tire’s speed rating. The speed rating denotes thespeed at which a tire is designed to be driven for extended periods oftime under

10. Tire Ply Composition and Material Used: Indicates the number ofplies or the number of layers of rubber-coated fabric in the tire tread andsidewall

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including inter

When your temporary spare tire is installedWhen one of your road tires needs to be replaced with the temporaryspare, the TPMS system will continue to

Low Tire PressureWarning LightPossible cause Customer Action RequiredSolid Warning Light Tire(s)under-inflated1. Check your tire pressure toensure tir

AUDIO SYSTEMSQuick start — How to get goingDriving while distracted can result in loss of vehicle control,accident and injury. Ford strongly recommend

Low Tire PressureWarning LightPossible cause Customer Action RequiredFlashing WarningLightSpare tire in use Your temporary spare tire is inuse. Repair

TPMS reset procedure (if applicable)This procedure is only required after tire rotation on vehicleswith different front and rear tire pressures.To det

Please take the tool with theprovided Velcro威 strip on the backand mount it in the bottom rightcorner of your Owner’s Guide case(as shown) for safe ke

If reset mode has been entered successfully, the horn will sound once,the TPMS indicator will flash and the message center will display TRAINLF TIRE.I

illuminate while the tool is active. The horn will sound once within10 seconds to indicate the process was successful.Note: If a double horn chirp is

Tire rotation using therecommended sequence(front tires at top of diagram)Sensor position following tirerotationSensor 1: 50 psiSensor 2: 50 psiSensor

As in this example, the rear tires rotated to the front and properlyinflated to 50 psi (345 kPa) for the front axle would falsely illuminate thelow ti

• Remove the tire chains when they are no longer needed. Do not usetire chains on dry roads.• The suspension insulation and bumpers will help prevent

vehicle, the weight of the equipment must be subtracted from thepayload listed on the Tire Label in order to determine the new payload.The appropriate

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loador king pin w

Listening to satellite radio (if equipped)1. If the audio system is turned off,press VOL-PUSH to turn the radioon. Turn VOL-PUSH to adjust thevolume.N

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheeltrailer), and driver only (150 lb. [68 kg]). Consult your authorizeddealer (or

6. If your vehicle will be towing a trailer, load from your trailer will betransferred to your vehicle. Consult this manual to determine how thisreduc

Special loading instructions for owners of pickup trucks andutility-type vehiclesFor important information regarding safe operation of this typeof veh

Regular Cab 4x2 (126” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.2L (withmanualtransmission)3.31 7200 (3266)

Regular Cab 4x4 (126” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L 3.55 11500 (5216) 6300 (2857)4.6L 3.73 12

SuperCab 4x2 (133” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11500 (5216) 6400 (2903)

SuperCab 4x2 (145” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11700 (5307) 6500 (2948)

SuperCab 4x4 (133” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11500 (5216) 6100 (2767)

SuperCab 4x4 (145” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11700 (5307) 6200 (2812)

For a single CD system, if a discis not already loaded, insert onlyone, label side up into the CD slot.LOADING CD and READING DISC will appear in the

Crew Cab 4x2 (139” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11700 (5307) 6400 (2903)

Crew Cab 4x4 (139” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.73 12200 (5534) 6600 (2994)

Crew Cab 4x2 (151” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.55 11700 (5307) 6300 (2858)

Crew Cab 4x4 (151” wheelbase)Engine Rear axle ratio MaximumGCWR-lb. (kg)Maximumtrailerweight-lb. (kg)4.6L (with 17”tires)3.73 12200 (5534) 6600 (2994)

Weight distributing hitchWhen hooking up a trailer using a load equalizing hitch, always use thefollowing procedure:1. Park the unloaded vehicle on a

Trailer lampsTrailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working.

Trailer towing tips• Practice turning, stopping and backing up before starting on a trip toget the feel of the vehicle trailer combination. When turni

RECREATIONAL TOWINGFollow these guidelines if you have a need for recreational (RV) towing.An example of recreational towing would be towing your vehi

STARTINGPositions of the ignition1. OFF/LOCK, locks the steeringwheel, automatic transmissiongearshift lever and allows keyremoval.Note: The ignition

Do not start your vehicle in a closed garage or in other enclosedareas. Exhaust fumes can be toxic. Always open the garage doorbefore you start the en

Press SHUFFLE to engage shufflemode. SHUFFLE ON will appear inthe display. If you wish to engageshuffle mode right away, press SEEK to begin random pl

• Make sure the parking brake isset.If starting a vehicle with a manual transmission:• Make sure the parking brake isset.• Push the clutch pedal to th

Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START). Ifthere is difficulty in turning the key,rotate the steering wheel u

heater is available, the addition of unleaded gasoline to your tank willimprove cold starting performance. Your vehicle is designed to operateon E85et

Failure to follow engine block heater instructions could result inproperty damage or physical injury.To reduce the risk of electrical shock, do not us

• Finally, have the engine block heater system checked during your falltune-up to be sure it’s in good working order.How to use the engine block heate

Four-wheel anti-lock brake system (ABS)Your vehicle is equipped with an Anti-lock Braking System (ABS). Thissystem helps you maintain steering control

Parking brakeTo set the parking brake (1), pressthe parking brake pedal down untilthe pedal stops.The BRAKE warning lamp will illuminate and will rema

During Traction Control™ operation,the traction control active light willilluminate and the engine will not“rev-up” when you push further onthe accele

• Some noise is normal during operation. If the noise is excessive, checkfor a low power steering fluid level before seeking service by yourauthorized

Vehicles with a higher center of gravity such as utility vehiclesand trucks handle differently than vehicles with a lower centerof gravity. Utility ve

AM/FM stereo system (if equipped)Driving while distracted can result in loss of vehicle control,accident and injury. Ford strongly recommends that dri

2. Locate the round access plug onthe underside of the steeringcolumn cover.3. Remove the access plug using a flat head screwdriver, then push theover

2. Open the center console bin.Using a screwdriver, carefully pry offthe console finish panel surroundingthe shifter mechanism by inserting ascrewdriv

If the parking brake is fully released, but the brake warning lampremains illuminated, the brakes may not be working properly.See your authorized deal

To put your vehicle in P (Park):• Come to a complete stop• Move the gearshift lever and securely latch it in P (Park)Always set the parking brake full

• Floor-shift transmissionThe transmission control indicator(TCIL) will illuminate on theinstrument cluster.Drive (not shown)Drive is activated when t

1 (First)• Provides maximum engine braking.• Allows upshifts by moving gearshift lever.• Will not downshift into 1 (First) at high speeds; allows for

5. Release the parking brake, then slowly release the clutch pedal whileslowly pressing on the accelerator.During each shift, the clutch pedal must be

Maximum downshift speeds1Shift from: Transfer case position (if equipped)2H or 4H 4LD(Overdrive) - 455 mph (89 km/h) 21 mph (34 km/h)4 - 3 45 mph (72

To help avoid personal injury, always use caution when inreverse and when using the RSS.This system is not designed to prevent contact with small ormo

The RSS automatically turns onwhen the gearshift lever is placed inR (Reverse) and the ignition is ON.An RSS control allows the driver toturn the RSS

2. AUDIO: Press AUDIO repeatedlyto gain access to the followingsettings:BAL (Balance): Press AUDIO to reach the balance setting.Use/ / SEEK to adjust

REVERSE CAMERA SYSTEM (IF EQUIPPED)The reverse camera system, locatedon the tailgate, provides a videoimage (which appears in the rearview mirror) of

Use the side mirrors and rear view mirror to get better coverage on bothsides and rear of the vehicle. When shifting out of reverse and into anyother

dark. If either of the lamps are not operating, stop using the reversecamera system, at least in the dark, until the lamp(s) are replaced andfunctioni

Using a manual 4WD system (if equipped)2H (2WD High) – Power to the rear wheels only; used for street andhighway driving. Provides optimal smoothness

Note: Some noise may be heard as the system shifts or engages; this isnormal.Note: For proper operation in 4WD Low, ensure the transfer case shiftleve

normal and should be no reason for concern. Refer to Shifting to/from4L (4WD Low) for proper operation.Shifting between 2H (2WD High) and 4H (4WD High

4H (Lock) - The “4X4 HI” light will illuminate in the instrument clusterwhen this position is selected. This position is not recommended for useon dry

If your vehicle goes off the edge of the pavement• If your vehicle goes off the edge of the pavement, slow down, butavoid severe brake application, ea

turn the steering wheel only as rapidly and as far as required to avoidthe emergency. Excessive steering will result in less vehicle control,not more.

4WD Systems4WD (when you select a 4WD mode) uses all four wheels to power thevehicle. This increases traction, enabling you to drive over terrain andr

Setting the clock: Press and hold CLK until the hours begin to flash.Press/ / SEEK to manually increase/decrease the hours.Press CLK again to set the

Be cautious of sudden changes in vehicle speed or direction when youare driving in mud. Even 4WD vehicles can lose traction in slick mud. Aswhen you a

When climbing a steep slope or hill,start in a lower gear rather thandownshifting to a lower gear from ahigher gear once the ascent hasstarted. This r

faster, because as in other vehicles, braking occurs at all four wheels. Donot become overconfident as to road conditions.Make sure you allow sufficie

engine or your vehicle may stall. Driving through deep water wherethe transmission vent tube is submerged may allow water into thetransmission and cau

• Headlight aim may require re-adjustment.• The tire air pressures recommended for general driving are found onthe vehicle’s Safety Certification Labe

Transmission operation while plowing• Shift transfer case to 4L (4WD Low) when plowing in small areas atspeeds below 5 mph (8 km/h).• Shift transfer c

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•

HAZARD FLASHER CONTROLThe hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ign

This switch is located in the frontpassenger’s footwell, behind the kickpanel access cover, to the left of thefuse box. The access cover needs tobe re

Customer Assistance 321Reporting safety defects (U.S. only) 327Reporting safety defects (Canada only) 328Cleaning 329Maintenance and Specifications 33

Accessory delay: Your vehicle is equipped with accessory delay whichallows you to operate the window switches and the audio for up to tenminutes after

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

To reinstall the fuse box cover, place the top part of the cover on thefuse panel, then push the bottom part of the cover until you hear it clickshut.

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF01 10A* Run/Accessory - Wipers,Instrument cluster, Audio forXL/STXF02 20A*

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF18 10A* Electrochromatic mirror, Heatedseats, BSM, Compass, RSS(Reverse Se

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF33 15A* Shift solenoid, CMS #12 and #22,Ignition coilsF34 15A* PCM power,

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel DescriptionF116 30A** Blower motorF117 20A** Instrument panel power pointF118 30A** He

Auxiliary relay boxThe relay box is located in the engine compartment on the left fender.• With Daytime Running Lamp (DRL) or 4x4 options• Without Day

CHANGING THE TIRESIf you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel

When driving with one of the dissimilar spare tires listed above, do not:• Exceed 50 mph (80 km/h)• Load the vehicle beyond maximum vehicle load ratin

When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to:• Towing a trailer• Driving vehicles equipped with a

• DELETE SONG: Press OK to delete a song from the system’smemory. Press/ to cycle through the saved songs. When thesong appears in the display that yo

2. Fully insert the jack handlethrough the bumper hole and intothe guide tube through the accesshole in the rear bumper.3. Turn the handle countercloc

3. Block the diagonally oppositewheel.4. Obtain the spare tire and jackfrom their storage locations.5. Use the tip of the lug wrench toremove any whee

• RearTo lessen the risk ofpersonal injury, do not putany part of your body under thevehicle while changing a tire. Donot start the engine when yourve

• Seven lug nut wheel12. Stow the flat tire. Refer to Stowing the flat/spare tire.13. Stow the jack and lug wrench. Make sure the jack is fastened so

6. If removed, install the spare tire lock (if equipped) into the bumperdrive tube with the spare tire lock key (if equipped) and jack handle.WHEEL LU

JUMP STARTINGThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury orvehicle da

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex

3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables.Removing the jum

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

To activate, press MENU repeatedly until RBDS (ON/OFF) appears inthe display. Use/ / SEEK to toggle RBDS ON/OFF. WhenRBDS is OFF, you will not be able

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

Track/Folder mode: Available only on MP3 discs in CD mode. In Trackmode, pressingSEEK, SEEK will scroll through all tracks on thediscIn Folder mode, p

• After polishing chrome bumpers, apply a coating of MotorcraftPremium Liquid Wax (ZC-53-A), available from your authorized dealer,or an equivalent qu

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when

4.6L ENGINE5.4L ENGINEPLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your aut

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

• Be certain to wash or wipe your hands clean if you have been incontact with certain products such as insect repellent and suntanlotion in order to a

For general cleaning, use mild, soapy water and a soft, damp cloth, thendry with a clean, dry cloth, or use or use Motorcraft Dash & VinylCleaner

LEATHER SEATS(IF EQUIPPED, EXCEPT FOR THE KING RANCH SUPERCREW)Your leather seating surfaces have a clear, protective coating over theleather.For King

• Test any cleaner or stain remover on an inconspicuous part of theleather as cleaners may darken the leather. For more specific cleaninginformation,

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

7. SHUFFLE: In CD/MP3 mode,press SHUFFLE to engage shufflemode. SHUFFLE ON will appear inthe display. If you wish to engage shuffle mode right away, p

2. Block the wheels.To reduce the risk of vehicle damage and/or personal burninjuries, do not start your engine with the air cleaner removedand do not

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT4.2L V6 engine1. Battery2. Clutch fluid reservoir (manual transmission)3. Brake fluid reservoir4. Engi

4.6L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Engine oil filler cap4. Power steering fluid reservoir5. Brake fluid reserv

5.4L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Air filter assembly4. Power steering fluid reservoir5. Engine oil dipstick6

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Poor wiper quality can be improved by cleaning the wiper blades and thewindshield, refer to Windows and wiper blades in the Cleaningchapter.To prolong

• 4.6L/5.4L V8 engine5. Locate and carefully remove the engine oil level dipstick.6. Wipe the dipstick clean. Insert the dipstick fully, then remove i

• 4.6L/5.4L V8 engine• If the oil level is below the lowerhole or the MIN mark, addenough oil to raise the levelwithin the lower and upper holesor wit

Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oilOnly use oils “Certified For Gasoline Engines” by th

BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.If

14. AM/FM: Press AM/FM to selectAM/FM1/FM2 frequency band.15. ON/OFF/Volume: PressVOL-PUSH to turn ON/OFF. TurnVOL-PUSH to increase/decreasevolume.Not

Keep batteries out of reach of children. Batteries contain sulfuricacid. Avoid contact with skin, eyes or clothing. Shield your eyeswhen working near

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

Do not put engine coolant in the windshield washer fluidcontainer. If sprayed on the windshield, engine coolant couldmake it difficult to see through

To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant pressure relief cap. Thecooling system is under press

Used engine coolant should be disposed of in an appropriatemanner. Follow your community’s regulations and standards for recyclingand disposing of aut

What you should know about fail-safe cooling (if equipped)If the engine coolant supply is depleted, this feature allows the vehicle tobe driven tempor

2. Arrange for the vehicle to be taken to an authorized dealer.3. If this is not possible, wait a short period for the engine to cool.4. Check the coo

Fuel ethanol and gasoline may contain benzene, which is acancer-causing agent.Observe the following guidelines when handling automotive fuel:• Extingu

When checking the VIN look for the engine type identifier (8thcharacter). If your vehicle is an FFV, then the character will belabeled as a “V”.Pure e

Premium/Audiophile in-dash six CD/MP3/satellite compatible soundsystem (if equipped)Driving while distracted can result in loss of vehicle control,acc

RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr

If the check fuel cap light or a“check fuel cap” message comes on,the fuel filler cap may not beproperly installed. The light ormessage can come on af

FFV (Flex Fuel Vehicle) Fuel CapIf your vehicle is FFV capable it will have a yellow colored fuel cap.Choosing the right fuelIf your vehicle is a flex

Octane recommendationsDo not be concerned if your enginesometimes knocks lightly. However,if it knocks heavily under mostdriving conditions while you

Unleaded Gasoline enginesIf you are experiencing starting, rough idle or hesitation driveabilityproblems during a cold start, try a different brand of

ESSENTIALS OF GOOD FUEL ECONOMYMeasuring techniquesYour best source of information about actual fuel economy is you, thedriver. You must gather inform

2. Each time you fill the tank, record the amount of fuel added (ingallons or liters).3. After at least three to five tank fill-ups, fill the fuel tan

• Warming up a vehicle on cold mornings is not required and mayreduce fuel economy.• Resting your foot on the brake pedal while driving may reduce fue

The EPA window sticker should be your guide for the fuel economycomparisons with other vehicles.It is important to note the box in the lower left corn

Exhaust leaks may result in entry of harmful and potentiallylethal fumes into the passenger compartment.Do not make any unauthorized changes to your v

Satellite radio is available only with a valid SIRIUS radiosubscription. Check with your authorized dealer for availability.2.(Phone): When pressed, t

detected by the OBD-II may not have symptoms that are apparent,continued driving with the Service engine soonindicator on canresult in increased emiss

1. Start the engine and let it rununtil it reaches normal operatingtemperature (the engine coolanttemperature gauge indicator will benear the center o

Carefully read cautionary information on product label. ForMEDICAL EMERGENCY INFORMATION contact a physician orPoison Control Center immediately; on F

weather or pulling a trailer, the vehicle should be turned off for about 30minutes to allow fluid to cool before checking.1. Drive the vehicle 20 mile

The transmission fluid should be inthis range if at normal operatingtemperature (150°F-170°F[66°C-77°C]).The transmission fluid should be inthis range

Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and re

3. Fluid level should be at bottom ofthe opening.4. Add enough fluid through thefiller opening so that the fluid levelis at the bottom of the opening.

3. Add only enough fluid throughthe filler opening so that the fluidlevel is at the bottom of theopening.Use only fluid that meets Ford specifications

Changing the air filter element• 4.2L/4.6L engines1. Loosen the clamp that securesthe air filter element in place.2. Carefully separate the two halves

2. Pull air filter tray assembly outtoward front of vehicle and lift airfilter element up and out of housing.The air filter box needs to be free of an

• DELETE ALL SONGS: Press OK to delete all song’s from thesystem’s memory. The display will read ARE YOU SURE ? Press OK toconfirm deletion of all sav

MOTORCRAFT PART NUMBERSComponent 4.2L V6 engine 4.6L V8 engine 5.4L V8 engineAir filter element FA-1632 FA-1632 FA-1754Battery BTX-59 orBTX-65-6503BTX

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord part name orequivalentFord part number /Ford specificationBrake fluid and (clutchfl

Item CapacityFord part name orequivalentFord part number /Ford specificationRear 8.8/9.75 inch axlefluid5.5 pints (2.6L)3Motorcraft SAE75W-140 RearSyn

Item CapacityFord part name orequivalentFord part number /Ford specificationTransfer case fluid(4X4 / AWD)2.0 quarts (1.9L)6Motorcraft TransferCase Fl

Item CapacityFord part name orequivalentFord part number /Ford specificationFuel tankReg. Cab 8’ box /SuperCab 6.5’ box /SuperCab 8’ box27.0 gallons (

ENGINE DATAEngine 4.2L V6 engine 4.6L V8 engine 5.4L V8 engineCubic inches 256 281 330Required fuel87 octane 87 octane 87 octane orEthanol (E85)2Firin

• 4.6L V8 Engine and 5.4L V8 EngineIDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regu

Vehicle identification number (VIN)The vehicle identification number islocated on the driver sideinstrument panel.Please note that in the graphic,XXXX

TRANSMISSION/TRANSAXLE CODE DESIGNATIONSYou can find atransmission/transaxle code on theSafety Compliance CertificationLabel. The following table tell

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

BASS: Press MENU to reach the bass setting.Use/ / SEEK, SEEK to adjust.TREB (Treble): Press MENU to reach the treble setting.Use/ / SEEK, SEEK to adju

LifestyleAsh cup / smoker’s packageBedliners and bedmatsCargo organization and managementTowing mirrorsTrailer hitches, wiring harnesses and accessori

AAccessory delay ...111Air cleaner filter ...377–378, 380Air conditioning ...85, 87Airbag supplementalrestra

Child safety seats - boosterseats ...193Cleaning your vehicleengine compartment ...331instrument pa

idle speed control ...349lubrication specifications ...381refill capacities ...381service points ...

heating and air conditioningsystem ...82, 85, 87Homelink wireless controlsystem ...120Hoo

heated ...114programmable memory ...149side view mirrors (power) ...112signal ...

Safety ComplianceCertification Label ...386Satellite Radio Information ...48Seats ...158c

VVehicle Identification Number(VIN) ...387Vehicle loading ...237Ventilating your vehicle

398

399

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Use / / SEEK, SEEK to toggle ON/OFF. When COMPRESSis ON, the system will bring soft and loud CD passages together for amore consistent listening level

400

6. OK:(Play/Pause): Thiscontrol is operational in CD andDVD mode (if equipped). When aCD or DVD is playing in the FES system, press this control to pl

In satellite radio mode (if equipped), there are 18 available presets,six each for SAT1, SAT2 and SAT3. To save satellite channels in yourmemory prese

17. LOAD: To load a disc into thesystem, press LOAD. Select a slotnumber using memory presets 1–6.When the display reads LOAD CD#,load the desired dis

Auxiliary input jack (Line in — if equipped)Your vehicle may be equipped with an Auxiliary Input Jack (AIJ), locatedin the instrument panel tray. The

4. Turn the radio on, using either a tuned FM station or a CD loaded intothe system. Adjust the volume to a comfortable listening level.5. Turn the po

GENERAL AUDIO INFORMATIONRadio frequencies:AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio

CD units are designed to play commercially pressed 4.75 in (12 cm)audio compact discs only. Due to technical incompatibility, certainrecordable and re

• MP3 folder mode represents a folder structure consisting of one levelof folders. The CD player numbers all MP3 tracks on the disc (notedby the .mp3

roof of your vehicle. The vehicle roof provides the best location for anunobstructed, open view of the sky, a requirement of a satellite radiosystem.

Fuel pump shut-off switch: In the event of an accident thesafety switch will automatically cut off the fuel supply to theengine. The switch can also b

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title informationnot available at thistime on this channel.The

Your vehicle may be equipped with a Family Entertainment System(FES) which allows you to listen to audio CDs, MP3 discs, watch DVDsand to plug in and

Press VIDEO to change the sourcedisplayed on the screen. Pressrepeatedly to cycle through:DVD-DISC, DVD-AUX, NON-DVD,OFF.Press the power button to tur

To play an MP3 disc in the DVD system:1. Ensure that the vehicle ignition is in the RUN or ACCESSORYposition.2. Insert an MP3 disc into thesystem, lab

5. Press VIDEO on the DVD system to change the video source toDVD-AUX. If your source is properly plugged in, it will appear on theLCD (Liquid Crystal

1. Connect the wired headphones in to the headphone jacks on eitherside of the DVD system. Each side is labeled Aor B. Headphonesplugged into jack A w

1. Headphone control A/B: Pressto select either the A or Bheadphone source. Then pressMEDIA to select the desired playingmedia for that headset. When

a video signal is detected on the auxiliary video input, and the display isin the DVD-AUX video mode, the display will automatically turn on.8. Infrar

select from Angle, Aspect Ratio, Language, Subtitles, Disc resume,Compression, Restore Defaults and Back. For more detailed information,refer to Menu

BREAKING-IN YOUR VEHICLEYour vehicle does not need an extensive break-in. Try not to drivecontinuously at the same speed for the first 1,000 miles (1,

1. Power control: Press to turn the FES (Family EntertainmentSystem) ON/OFF.2. Cursor controls: Use in various active menus to advance the cursorup/do

15. MEDIA: Press to cycle through the possible media sources: AM,FM1, FM2, SAT (if equipped), CD, DVD, LINE IN (if equipped),DVD-AUX.Channel B can onl

Battery replacementBatteries are supplied with the remote control unit. Since all batterieshave a limited shelf life, replace them when the unit fails

HeadphonesWireless headphonesYour FES system is equipped withtwo sets of battery powered,infrared wireless headphones. TwoAAA batteries are needed to

To install the batteries, remove the screw at the bottom of the cover.Then, lightly press down on top and slide the cover off.When replacing the batte

To operate the headphones:• Press POWER on the ear piece to turn on the headphones. A redindicator light will illuminate indicating the headphones are

Wired headphonesDo not leave children unattended in the vehicle and do not letchildren operate the system while unsupervised. If wiredheadphones or au

choose to listen to the radio, CD, MP3, DVD, or DVD-AUX media sourcesover headphones while the front speakers play the chosen selection forthe front a

While operating in Headphone Only Mode, the system will have limitedfunctionality.• The system will only output audio to the headphones. It will not b

Aspect ratioSelect ASPECT RATIO to select theviewing size and shape of the videodisplayed on the LCD screen. This isdisc dependent.You can select from

Service Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This pote

SubtitlesSelect SUBTITLES to turn thesubtitle option on or off. The systemdefault is OFF.Once you have made your selection,press ENTER to confirm. Thi

Playing MP3 discsTo play an MP3 disc on your DVD system:1. Ensure that the vehicle ignition is in the RUN or ACCESSORYposition.2. Ensure that the DVD

• PC configuration — Encoding MP3 files requires intensive use of yourcomputer’s resources. Follow the PC configuration recommendationsof the encoder

Playing a DVD1. Ensure that the vehicle ignition is in the RUN or ACCESSORYposition.2. Ensure that the navigation system is on.3. Insert a DVD label-s

Frame by frame1. With a DVD playing, press pause.2. Press the right cursor button. TheDVD will advance one frame. Eachpress of the right cursor button

The B headphone jack (5) is locatedon the right side of the DVD system.Plug in wired headphones (notincluded) here.Note: The B headphones can onlyacce

The three states are described as:FULL (enabled): The FES has control over the primary (speaker) andsecondary (headphone) audio sources.LOCAL: The FES

use this product in any commercial (i.e. revenue generating) real timebroadcasting (terrestrial, satellite, cable and /or any other media)broadcasting

Be sure to review User Manuals for video games and video game equipmentwhen used as auxiliary inputs for your Family Entertainment System (FES).Do not

Temperature extremesWhen the vehicle is parked under direct sunlight or in an extremely coldplace for a long period of time, wait until the cabin temp

Notice to owners of pickup trucks and utility type vehiclesUtility vehicles have a significantly higher rollover rate thanother types of vehicles.Befo

While operating in Headphone Only Mode, the system will have limitedfunctionality.• The system will only output audio to the headphones. It will not b

HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature selection:Controls the tempe

3. Set the fan speed to the highest setting.4. Direct the outer instrument panel vents towards the side windows.To increase airflow to the outer instr

3. A.RRear defroster (if equipped): Press to defrost the rearwindow. Refer to Rear window defroster later in this chapter for moreinformation.3. B. He

Panel ( ) and panel/floor ( ) modes:• Move the temperature control to the coolest setting.• Select A/C and recirculated air (). Use recirculated air w

AUTOMATIC TEMPERATURE CONTROL (ATC) SYSTEM(IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius: Ifyour vehicle is equipped wi

1. Defrost: Distributes outside air through the windshield defrostervents and demister vents. Can be used to clear the windshield of fog andthin ice.2

Automatic Temperature Control (ATC) system with heated seats(if equipped)Temperature conversion: To switch between Fahrenheit and Celsius:If your vehi

MAX A/C: For maximum cooling performance, press , A/C, ,and set the temperature to 60°F and the highest blower setting.1.Defrost: Distributes outside

12. A/C control: Press to activate/deactivate air conditioning. Use withrecirculated air to improve cooling performance and efficiency. Engagesautomat

Export unique (Non–United States/Canada) vehicle specificinformationFor your particular global region, your vehicle may be equipped withfeatures and o

Do not place objects on top of the instrument panel as theseobjects may become projectiles in a collision or sudden stop.REAR WINDOW DEFROSTER (IF EQU

HEADLAMP CONTROLRotate the headlamp controlclockwise to the first position toturn on the parking lamps. Rotateclockwise to the secondpositionto also t

Fog lamp control (if equipped)The headlamp control also operatesthe fog lamps. The fog lamps can beturned on only when the headlampcontrol is in the,

Always remember to turn on your headlamps at dusk or duringinclement weather. The Daytime Running Lamp (DRL) systemdoes not activate the tail lamps an

Vertical aim adjustment1. Park the vehicle directly in front of a wall or screen on a level surface,approximately 25 feet (7.6 meters) away.• (1) 8 fe

TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSMap lampsTo turn on the map la

Rear dome lamp (if equipped)• ON orD: The dome light willstay on.• DOOR or middle position: Thedome light will only come on if adoor is opened.• OFF o

BULB REPLACEMENTHeadlamp CondensationThe headlamps are vented to equalize pressure. When moist air entersthe headlamp(s) through the vents, there is a

Replacing headlamp bulbs1. Make sure that the headlamp control is in the OFF position and openthe hood.2. At the top and inboard side of theheadlamp,

Replacing front parking lamp/turn signal/sidemarker bulbs1. Make sure the headlamp controlis in the OFF position and open thehood.2. At the top and in