Ford 2013 E-450 v.2 User Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 437
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
Deactivating and Activating the Belt-Minder® Feature
WARNING: While the design allows you to deactivate your
Belt-Minder®, this system is designed to improve your chances of
being safely belted and surviving an accident. We recommend you leave
the Belt-Minder® system activated for yourself and others who may use
the vehicle. To reduce the risk of injury, do not deactivate or activate
the Belt-Minder® feature while driving the vehicle.
Read Steps1-5thoroughly before proceeding with the programming
procedure.
Before following the procedure, make sure that:
the parking brake is set
the transmission selector lever is in position P
the ignition is off
all vehicle doors and the hood are closed
the driver’s safety belt is unbuckled
the parking lamps and headlamps are off
1. Turn the ignition on. DO NOT START THE ENGINE.
2. Wait until the safety belt warning light turns off (about one minute).
Step 3 must be completed within 30 seconds after the safety belt
warning light turns off.
3. Buckle then unbuckle the safety belt three times at a moderate speed,
ending with the safety belt in the unbuckled state.
After Step 3 is complete, the safety belt warning light will be turned
on for three seconds.
Belt-Minder® will automatically exit programming mode without
changing its enable status if Step 4 does not occur within 10 seconds
of the end of Step 3.
4. Within about seven seconds of the light turning off, buckle then
unbuckle the safety belt.
This will disable the feature for that seating position if it is currently
enabled.
This will enable the feature for that seating position if it is currently
disabled.
42 Safety Belts
2013 Econoline (eco)
Owners Guide gf, 2nd Printing, November 2012
USA (fus)
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 436 437

Comments to this Manuals

No comments