Ford 2013 Focus v.3 User Manual Page 266

  • Download
  • Add to my manuals
  • Print
  • Page
    / 487
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 265
Headlamp assembly:
A. High beam headlamp bulb
B. Side marker bulb
C. Low beam headlamp bulb
D. Front parking lamp and turn
signal bulb
High beam headlamp bulb:
1. Remove the headlamp assembly.
2. Remove the service cap.
3. Disconnect the electrical
connector.
4. Remove the bulb from the
headlamp assembly by turning it
counterclockwise, then pull it
straight out.
Install the new bulb in reverse order.
Low beam headlamp bulb:
1. Remove the headlamp assembly.
2. Remove the service cap.
3. Disconnect the electrical
connector.
4. Remove the bulb from the
headlamp assembly by turning it
counterclockwise, then pull it
straight out.
Install the new bulb in reverse order.
Note: Be sure that the spring clip is not damaged or detached from the
headlamp assembly during the replacement procedure.
Replacing HID Headlamp Bulbs (If Equipped)
The low beam headlamps on your vehicle use a “high intensity discharge”
source. These lamps operate at a high voltage. When the bulb is burned
out, the bulb and starter capsule assembly must be replaced by your
authorized dealer.
BA
C
D
Maintenance 265
2013 Focus (foc)
Owners Guide gf, 3rd Printing, November 2012
USA (fus)
Page view 265
1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 486 487

Comments to this Manuals

No comments