Ford 2013 Focus v.3 User Manual download pdf (Page 80)

If your programmed transmitters or standard SecuriLock coded keys

(integrated keyhead transmitters only) are lost or stolen and you do not

have an extra coded key, you will need to have your vehicle towed to an

authorized dealer. The key codes need to be erased from your vehicle

and new coded keys will need to be programmed.

Store an extra programmed key away from the vehicle in a safe place to

help prevent any inconveniences. See an authorized dealer to purchase

additional spare or replacement keys.

Programming a Spare Integrated Keyhead Transmitter

Note: A maximum of eight coded keys can be programmed to your

vehicle; all eight can be integrated keyhead transmitters.

You can program your own integrated keyhead transmitter or standard

SecuriLock® coded keys to your vehicle. This procedure will program

both the engine immobilizer keycode and the remote entry portion of the

remote control to your vehicle.

Only use integrated keyhead transmitters or standard SecuriLock® keys.

You must have two previously programmed coded keys and the new

unprogrammed key readily accessible. See your authorized dealer to have

the spare key programmed if two previously programmed coded keys are

not available.

Read and understand the entire procedure before you begin.

1. Insert the first previously programmed coded key into the ignition.

2. Turn the ignition from off to on. Keep the ignition on for at least

three seconds, but no more than 10 seconds.

3. Turn the ignition off and remove the first coded key from the ignition.

4. After three seconds but within 10 seconds of turning the ignition off,

insert the second previously coded key into the ignition.

5. Turn the ignition from off to on. Keep the ignition on for at least

three seconds, but no more than 10 seconds.

6. Turn the ignition off and remove the second previously programmed

coded key from the ignition.

7. After three seconds but within 10 seconds of turning the ignition off

and removing the previously programmed coded key, insert the new

unprogrammed key into the ignition.

8. Turn the ignition from off to on. Keep the ignition on for at least

six seconds.

9. Remove the newly programmed coded key from the ignition.

Security 79

2013 Focus (foc)

Owners Guide gf, 3rd Printing, November 2012

USA (fus)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 486 487

No comments

Ford 2013 Focus v.3 User Manual Page 80