Ford 2014 Mustang v.3 User Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 463
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
Note: If you are using MyKey®, the Belt-Minder cannot be disabled.
Also, if the Belt-Minder has been previously disabled, it will be
re-enabled during the use of MyKey®. See the MyKey® chapter.
Read Steps1-4thoroughly before proceeding with the programming
procedure.
The driver and front passenger Belt-Minder features can be deactivated
or activated by performing the following procedure:
Before following the procedure, make sure that:
The parking brake is set.
The transmission is in park (P) (automatic transmission) or neutral
(N) (manual transmission)
The ignition is on.
The driver and front passenger safety belts are unbuckled.
1. Turn the ignition on. Do not start the engine.
2. Wait until the safety belt warning light turns off (about one minute).
Step 3 must be completed within 30 seconds after the safety belt
warning light turns off.
3. For the seating position being disabled, buckle then unbuckle the
safety belt three times at a moderate speed, ending in the unbuckled
state. Step 3 must be completed within 30 seconds after the safety belt
warning light turns off.
After Step 3, the restraint system warning light (airbag light) will be
turned on for three seconds.
4. Within about seven seconds of the light turning off, buckle then
unbuckle the safety belt.
This will disable the Belt-Minder feature for that seating position if it
is currently enabled.
This will enable the Belt-Minder feature for that seating position if it is
currently disabled.
Safety Belts 41
2014 05+ Mustang (197)
Owners Guide gf, 3rd Printing, January 2014
USA (fus)
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 462 463

Comments to this Manuals

No comments