Ford 2002 F-250 User Manual download pdf (Page 220)

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid.

Refer to the scheduled maintenance

guide for the service interval

schedules. If adding fluid is

necessary, use only MERCON威 ATF.

Check the fluid level when it is at ambient temperature, 20° – 80° F

(-7° – 25° C):

1. Check the fluid level on the dipstick. It should be between the arrows

in the FULL COLD range. Do not add fluid if the level is within this

range.

2. If the fluid level is low, start the engine.

3. While the engine idles, turn the steering wheel left and right several

times.

4. Turn the engine off.

5. Recheck the fluid level on the dipstick. Do not add fluid if the level is

between the arrows in the FULL COLD range.

6. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the FULL COLD range. Be sure to put the

dipstick back in the reservoir.

Maintenance and Specifications

220

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 263 264

No comments

Ford 2002 F-250 User Manual Page 220