Ford 2002 F-250 User Manual download pdf (Page 224)

The transmission fluid should be in

this range if at normal operating

temperature (66°C-77°C

[150°F-170°F]).

The transmission fluid should be in

this range if at ambient temperature

(10°C-35°C [50°F-95°F]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by

an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 ml (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement

concerns and/or possible

damage.

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

Maintenance and Specifications

224

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 263 264

No comments

Ford 2002 F-250 User Manual Page 224