Ford 2009 Flex v.1 User Manual download pdf (Page 130)

100

101

Note: The autounlock feature can be activated/deactivated

independently of the autolock feature.

Power door lock switch autounlock enable/disable procedure

Before starting, ensure the ignition is in the off position and all vehicle

doors are closed. You must complete Steps 1–5 within 30 seconds or the

procedure will have to be repeated. If the procedure needs to be

repeated, wait a minimum of 30 seconds before beginning again.

1. Place the key in the ignition and

turn the ignition to the on position.

2. Press the power door unlock

control on the door panel three

times.

3. Turn the ignition from the on

position to the off position.

4. Press the power door unlock control on the door panel three times.

5. Turn the ignition back to the on position. The horn will chirp one time

to confirm programming mode has been entered and is active.

6. To enable/disable the autounlock feature, press the lock control, then

press the unlock control. The horn will chirp once if autounlock was

deactivated or twice (one short and one long chirp) if autounlock was

activated.

7. Turn the ignition to the off position. The horn will chirp once to

confirm the procedure is complete.

2009 Flex (471)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

130

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 373 374

Comments to this Manuals

No comments

Ford 2009 Flex v.1 User Manual Page 130

Comments to this Manuals

Related products and manuals for Cars Ford 2009 Flex v.1