Ford 2009 Flex v.1 User Manual download pdf (Page 145)

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least three seconds, but no more

than 10 seconds.

6. Turn the ignition to the 1 (off) position and remove the second

previously programmed coded key from the ignition.

7. Within 20 seconds of turning the ignition to the 1 (off) position and

removing the previously programmed coded key, insert the new

unprogrammed key (new key/valet key) into the ignition.

8. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least six seconds.

9. Remove the newly programmed coded key from the ignition.

If the key has been successfully programmed it will start the vehicle’s

engine and will operate the remote entry system (if the new key is an

Integrated Keyhead Transmitter). The theft indicator light (if equipped)

will illuminate for three seconds and then go out to indicate successful

programming.

If the key was not successfully programmed, it will not start your

vehicle’s engine and/or will not operate the remote entry features. The

theft indicator light (if equipped) may flash on and off. Wait 20 seconds

and you may repeat Steps 1 through 8. If failure repeats, bring your

vehicle to your authorized dealer to have the new key(s) programmed.

To program additional new unprogrammed key(s), wait 20 seconds and

then repeat this procedure from Step 1.

PERIMETER ALARM SYSTEM (IF EQUIPPED)

The perimeter anti-theft system will help protect your vehicle from

unauthorized entry.

If there is any potential perimeter anti-theft problem with your vehicle,

ensure ALL Integrated Keyhead Transmitters are brought to the

authorized dealer to aid in troubleshooting.

Arming the system

When armed, this system will respond if unauthorized entry is

attempted. When unauthorized entry occurs, the system will flash the

turn signal lamps and will sound the horn.

The system is ready to arm whenever the key is in the off position, or is

removed from the ignition. Either of the following actions will prearm the

alarm system:

• Press the

control on the remote entry transmitter portion of your

Integrated Keyhead Transmitter.

2009 Flex (471)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

145

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 373 374

Comments to this Manuals

No comments

Ford 2009 Flex v.1 User Manual Page 145

Comments to this Manuals

Related products and manuals for Cars Ford 2009 Flex v.1