Ford 2011 E-450 v.2 User Manual download pdf (Page 265)

When the engine is cold, check the

level of the engine coolant in the

reservoir.

• The engine coolant should be at the FULL COLD level, or within the

COLD FILL or MIN / MAX range as listed on the engine coolant

reservoir (depending upon application).

• Refer to scheduled maintenance information for service interval

schedules.

If the engine coolant has not been checked at the recommended interval,

the engine coolant reservoir may become low or empty. If the reservoir is

low or empty, add engine coolant to the reservoir. Refer to Adding

engine coolant in this chapter.

Note: Automotive fluids are not interchangeable; do not use engine

coolant/antifreeze or windshield washer fluid outside of its specified

function and vehicle location.

Adding engine coolant

When adding coolant, make sure it is a 50/50 mixture of engine coolant

and distilled water. Add the mixture to the coolant reservoir, when the

engine is cool, until the appropriate fill level is obtained. If coolant is

filled to the COLD FILL RANGE or FULL COLD level when the engine is

not cool, the system will remain underfilled.

Maintenance and Specifications

265

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 333 334

No comments

Ford 2011 E-450 v.2 User Manual Page 265