Ford 2011 E-450 v.2 User Manual download pdf (Page 84)

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 2

(lock) position to the 4 (on)

position. Keep the ignition in the 4

(on) position for at least one

second, but no more than

10 seconds.

3. Turn the ignition to the 2 (lock)

position, and remove the coded key from the ignition.

4. After three seconds but within 10 seconds of removing the previously

programmed coded key, insert the other previously programmed coded

key into the ignition.

5. Turn the ignition from the 2 (lock) position to the 4 (on) position.

Keep the ignition in the 4 (on) position for at least one second but not

more than 10 seconds.

6. Turn the ignition to the 2 (lock) position, and remove the second key

from the ignition.

7. After three seconds but within 20 seconds of removing the previously

programmed coded key, insert the unprogrammed key (new/valet key)

into the ignition.

8. Turn the ignition from the 2 (lock) position to the 4 (on) position.

Keep the ignition in the 4 (on) position for at least one second.

9. Your new unprogrammed key is now programmed.

If the key has been successfully programmed it will start the vehicle’s

engine and the theft indicator light will illuminate for three seconds and

then go out. If the key was not successfully programmed, it will not start

your vehicle’s engine and the theft indicator light will flash on and off

rapidly. If failure repeats, bring your vehicle to your authorized dealer to

have the new key(s) programmed.

To program additional new unprogrammed key(s), repeat this procedure

from Step 1 for each additional key.

Locks and Security

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 333 334

No comments

Ford 2011 E-450 v.2 User Manual Page 84