Ford 2012 Focus Electric User Manual download pdf (Page 292)

What to do when a Tire Is Punctured

A tire puncture within the tire’s tread area can be repaired in two stages

with the temporary mobility kit:

• In the first stage, the tire will be reinflated with a sealing compound

and air. After the tire has been reinflated, you will need to drive the

vehicle a short distance (approximately 4 miles [6 km]) to distribute

the sealant in the tire.

• In the second stage, you will need to check the tire pressure and

adjust, if necessary, to the vehicle’s tire inflation pressure.

First Stage: Reinflating the Tire with Sealing Compound and Air

WARNING: Do not stand directly over the temporary mobility

kit while inflating the tire. If you notice any unusual bulges or

deformations in the tire’s sidewall during inflation, stop and call

roadside assistance.

WARNING: If the tire doesn’t inflate to the recommended tire

pressure within 15 minutes, stop and call roadside assistance.

Preparation

Park the vehicle in a safe, level and secure area, away from moving

traffic. Turn the hazard lights on. Apply the parking brake and turn the

motor off. Inspect the flat tire for visible damage.

Sealant compound contains latex. To avoid any allergic reactions, use the

non-latex gloves located in the accessory box on the underside of the

temporary mobility kit housing.

Do not remove any foreign object that has pierced the tire. If a puncture

is located in the tire sidewall, stop and call roadside assistance.

1. Remove the valve cap from the tire valve.

2. Unwrap the clear tube from the compressor housing.

3. Remove the tube cap and fasten the metal connector of the tube to the

tire valve, turning clockwise. Make sure the connection is tightly fastened.

292 Roadside Emergencies

2012 Focus Electric Vehicle (fob)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 379 380

No comments

Ford 2012 Focus Electric User Manual Page 292