Ford 2012 Focus Electric User Manual download pdf (Page 326)

Note: The vehicle must be in (P) park to charge the high-voltage battery.

Make sure that the 120 volt

convenience cord is completely

unwound before charging. Always

plug the cord into the AC outlet

before connecting the charging

coupler into the vehicle’s charge

port receptacle. The 120 volt

convenience cord inline control box

has three indicator lights that

represent the charging status;

power, charge and fault.

The charge port is located between the front left side door and front left

wheel well. There is an indentation located on the charge port door that

allows you to press to open and press to close the door.

Power (green light) — this indicator lights up when the cord is plugged

into the AC wall outlet.

Charge (green light) — Indicates status of charging:

• No light means the cord is not connected to the vehicle.

• Blinking light means that the charging is in process.

• Solid light means that the vehicle is connected but not charging.

Fault (red triangle light) — Lights up in case of a detected failure. No

charging is possible:

• Blinking red triangle light – means that the 120 volt convenience cord

is trying to reset the failure and could restart the charging cycle.

• Solid red triangle light – means that the fault is permanent. The cord

needs to be unplugged and re-plugged to reset the fault. If the fault

persists, contact your authorized dealer.

326 Maintenance and Specifications

2012 Focus Electric Vehicle (fob)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 379 380

No comments

Ford 2012 Focus Electric User Manual Page 326