Ford 2015 Fusion User Manual download pdf (Page 150)

If you do not intervene within 30 seconds,

the engine shuts down. Another message

appears in the information display to

inform you that the engine has shut down

in order to save fuel. Start your vehicle as

you normally do.

Automatic Engine Shutdown Override

Note: You cannot permanently switch off

the automatic engine shutdown feature.

When you switch it off temporarily, it turns

on at the next ignition cycle.

You can stop the engine shutdown, or reset

the timer, at any point before the

30-second countdown has expired by

doing any of the following:

• You can reset the timer by interacting

with your vehicle (such as pressing the

brake pedal or accelerator pedal).

• You can temporarily switch off the

shutdown feature any time the ignition

is on (for the current ignition cycle

only). Use the information display to

do so. See Information Displays

(page 93).

• During the countdown before engine

shutdown, you are prompted to press

OK or RESET (depending on your type

of information display) to temporarily

switch the feature off (for the current

ignition cycle only).

Stopping the Engine When Your

Vehicle is Stationary

Vehicles with an Ignition Key

1. Move the transmission selector lever

to position P (automatic transmission)

or 1 (manual transmission).

2. Turn the key to position 0.

3. Apply the parking brake.

Vehicles with Keyless Start

1. Move the transmission selector lever

to position P.

2. Press the button once.

3. Apply the parking brake.

Note: This switches off the ignition, all

electrical circuits, warning lamps and

indicators.

Note: If the engine is idling for 30 minutes,

the ignition and engine automatically shut

down.

Stopping the Engine When Your

Vehicle is Moving

WARNING

Switching off the engine when the

vehicle is still moving will result in a

loss of brake and steering assistance.

The steering will not lock, but higher effort

will be required. When the ignition is

switched off, some electrical circuits,

warning lamps and indicators may also be

off.

Vehicles with an Ignition Key

1. Move the transmission selector lever

to position N (automatic transmission)

or neutral (manual transmission) and

use the brakes to bring your vehicle to

a safe stop.

2. When your vehicle has stopped, move

the transmission selector lever to

position P (automatic transmission)

or 1 (manual transmission) and turn

the key to position 0.

3. Apply the parking brake.

Vehicles with Keyless Start

1. Move the transmission selector lever

to position N and use the brakes to

bring your vehicle to a safe stop.

147

Fusion/Mondeo (CC7), enUSA

Starting and Stopping the Engine

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 487 488

Comments to this Manuals

No comments