Ford 2015 Fusion User Manual download pdf (Page 310)

9. The vehicle jacking points are shown

here, and can be identified by the

triangle markings on the molding. The

triangle marking may be located on the

side or the underside of the molding.

The jacking points are identified on

vehicles without moldings by a pair of

arrows on the metal flange pointing to

the jacking point between them. Details

are depicted on the warning label on

the jack.

E174775

10. Place the jack at the jacking point

next to the tire you are changing. Turn

the jack handle clockwise until the

wheel is completely off the ground.

11. Remove the lug nuts with the lug

wrench.

12. Replace the flat tire with the spare

tire, making sure the valve stem is

facing outward. Reinstall the lug nuts

until the wheel is snug against the

hub. Do not fully tighten the lug nuts

until the wheel has been lowered. If

you are using the temporary tire, the

lug nut washers will not appear to be

flush with the rim. This is normal only

when using the temporary spare tire.

13. Lower the wheel by turning the jack

handle counterclockwise.

1

2

3

4

5

E75442

14. Remove the jack and fully tighten the

lug nuts in the order shown. See

Changing a Road Wheel (page 304).

15. Put the flat tire, jack and lug wrench

away. Make sure the jack is fastened

securely before you drive.

16. Unblock the wheel.

Type 2

1. Park on a level surface, set the parking

brake and activate the hazard flashers.

2. Place the transmission in park (P) and

turn the engine off. For vehicles with a

manual transmission, place the

transmission in reverse (R) after the

engine is turned off.

307

Fusion/Mondeo (CC7), enUSA

Wheels and Tires

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 487 488

Comments to this Manuals

No comments