Ford 2009 Flex v.1 User Manual download pdf (Page 83)

Function Number of bulbs Trade number

License plate lamp 2 C5WL

*High-mount brake lamp N/A LED

Fog lamp (if equipped) 2 H11

Map lamp 2 12V6W

Dome/reading lamps 6 578

To replace all instrument panel lights - see your authorized dealer.

*To replace these lamps - see your authorized dealer.

Replacing the interior bulbs

Check the operation of all bulbs frequently.

Replacing exterior bulbs

Check the operation of all the bulbs frequently.

Replacing headlamp (high beam/low beam) halogen bulbs

1. Make sure headlamp switch is in the off position, then open the hood.

2. Reach in behind the headlamp assembly to access the bulb sockets

and connectors.

3. Locate the high beam/low beam

electrical connector and remove it

by releasing the locking tab and

pulling it straight down.

4. Remove the bulb socket by

turning it counterclockwise and

pulling it straight out.

WARNING: Handle a halogen headlamp bulb carefully and keep

out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the

bulb to break the next time the headlamps are operated.

Install the new bulb(s) in reverse order.

Replacing HID headlamp bulbs (if equipped)

The headlamps on your vehicle use a “high intensity discharge” source.

These lamps operate at a high voltage. When the bulb is burned out, the

bulb and starter capsule assembly must be replaced by your authorized

dealer.

2009 Flex (471)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 373 374

No comments

Ford 2009 Flex v.1 User Manual Page 83