Ford 2011 E-450 v.2 User Manual download pdf (Page 141)

Note: If you have to drive a distance to get air for your tire(s), check

and record the tire pressure first and add the appropriate air pressure

when you get to the pump. It is normal for tires to heat up and the air

pressure inside to go up as you drive.

2. Remove the cap from the valve on one tire, then firmly press the tire

gauge onto the valve and measure the pressure.

3. Add enough air to reach the recommended air pressure.

Note: If you overfill the tire, release air by pressing on the metal stem in

the center of the valve. Then recheck the pressure with your tire gauge.

4. Replace the valve cap.

5. Repeat this procedure for each tire, including the spare.

Note: Some spare tires operate at a higher inflation pressure than the

other tires. For T-type/mini-spare tires (see the Dissimilar spare

tire/wheel information section for description): Store and maintain at

60 psi (4.15 bar). For full-size and dissimilar spare tires (see the

Dissimilar spare tire/wheel information section for description): Store

and maintain at the higher of the front and rear inflation pressure as

shown on the Tire Label.

6. Visually inspect the tires to make sure there are no nails or other

objects embedded that could poke a hole in the tire and cause an air

leak.

7. Check the sidewalls to make sure there are no gouges, cuts or bulges.

Tires, Wheels and Loading

141

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 333 334

No comments

Ford 2011 E-450 v.2 User Manual Page 141