Ford 2011 E-450 v.2 User Manual download pdf (Page 283)

1. Start the engine and let it run

until it reaches normal operating

temperature.

2. While the engine idles, turn the

steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN

and MAX lines. Do not add fluid if the level is in this range.

WARNING: For E-350 and E-450 vehicles with the Hydro-Boost

Brake System, do not press the brake pedal after the engine has

been turned off. Pressing the brake pedal after the engine has been

turned off will give a false power steering fluid level reading.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN and MAX lines. Be

sure to put the cap back on the reservoir. Refer to Maintenance

product specifications and capacities in this chapter for the proper

fluid type.

Do not operate the vehicle with a low power steering pump fluid level (if

the fluid level is below the MIN line).

Do not fill the power steering pump reservoir above the MAX line, as this

may result in leaks from the reservoir.

BRAKE FLUID

• E-150/E-250/E-350 Single Rear

Wheel

Maintenance and Specifications

283

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 333 334

No comments

Ford 2011 E-450 v.2 User Manual Page 283