Ford 2011 E-450 v.2 User Manual download pdf (Page 61)

100

101

Replacing license plate lamp bulbs

1. Turn the headlamp switch to the

off position.

2. Remove the two screws and the

license plate lamp assembly from

the rear door.

3. Remove bulb socket from lamp

assembly by turning it

counterclockwise.

4. Pull the bulb out from socket and

push in the new bulb.

To install the new bulb, follow the removal procedures in reverse order.

Replacing stop/turn/tail/side marker/backup lamp bulbs

The stop/turn/tail/side marker/backup lamp bulbs are located in the tail

lamp assembly. Follow the same steps to replace any of the bulbs:

1. Turn the headlamp switch to the

off position, then remove the four

screws and the lamp assembly from

the vehicle.

2. Rotate the bulb socket

counterclockwise and remove it

from lamp assembly.

3. Carefully pull the bulb straight

out of the socket and push in the

new bulb.

To install the lamp, follow the removal procedures in reverse order.

Lights

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 333 334

Comments to this Manuals

No comments

Ford 2011 E-450 v.2 User Manual Page 61

Comments to this Manuals

Related products and manuals for Cars Ford 2011 E-450 v.2