Ford 2011 E-450 v.2 User Manual download pdf (Page 74)

Autounlock feature

After the autolock feature has locked the doors, the autounlock feature

will unlock all the doors when:

• the vehicle has then come to a stop and the ignition is turned off or to

accessory; and

• the driver door is opened within 10 minutes of the ignition being

turned off or to accessory.

Note: The doors will not autounlock if the vehicle has been

electronically locked before the driver door is opened.

Deactivating/activating autounlock feature

Your vehicle comes with the autounlock features disabled; there are

three methods to enable/disable this feature:

• Through your authorized dealer, or

• by using a power door unlock/lock sequence, or

• by using the instrument cluster message center (if equipped). Refer to

Message center in the Instrument Cluster chapter.

Note: The autounlock feature can be activated/deactivated

independently of the autolock feature.

Power door lock switch autounlock enable/disable procedure

Before starting, ensure the ignition is off and all vehicle doors are closed.

You must complete Steps 1–5 within 30 seconds or the procedure will

have to be repeated. If the procedure needs to be repeated, wait a

minimum of 30 seconds before beginning again.

1. Turn the ignition on.

2. Press the power door unlock

control on the door panel three

times.

3. Turn the ignition off.

4. Press the power door unlock

control on the door panel three

times.

5. Turn the ignition back on. The horn will chirp one time to confirm

programming mode has been entered and is active.

6. To enable/disable the autounlock feature, press the lock control, then

press the unlock control. The horn will chirp once if autounlock was

deactivated or twice (one short and one long chirp) if autounlock was

activated.

Locks and Security

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 333 334

No comments

Ford 2011 E-450 v.2 User Manual Page 74