Ford 2015 E-450 User Manual download pdf (Page 27)

Try to pull the belt out of the retractor to make sure the retractor is in

the automatic locking mode (you should not be able to pull more belt out).

If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6.

8. Remove remaining slack from the

belt. Force the seat down with extra

weight, for example, by pressing

down or kneeling on the child

restraint while pulling up on the

shoulder belt in order to force slack

from the belt.

This is necessary to remove the remaining slack that will exist once the

extra weight of the child is added to the child restraint. It also helps to

achieve the proper snugness of the child seat to your vehicle.

Sometimes, a slight lean toward the buckle will provide extra help to

remove remaining slack from the belt.

9. Attach the tether strap (if the child seat is equipped). See Using

Tether Straps.

10. Before placing the child in the

seat, forcibly move the seat forward

and back to make sure the seat is

securely held in place.

To check this, grab the seat at the belt path and attempt to move it side

to side and forward and back. There should be no more than 1 inch

(2.5 centimeters) of movement for proper installation.

Ford recommends checking with a NHTSA Certified Child Passenger

Safety Technician to make certain the child restraint is properly installed.

In Canada, check with your local St. John Ambulance office for referral

to a Child Passenger Safety Technician.

26 Child Safety

2015 Econoline (eco)

Owners Guide gf, 1st Printing, June 2014

USA (fus)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 359 360

No comments

Ford 2015 E-450 User Manual Page 27