Ford 1999 Windstar User Manual download pdf (Page 99)

Reprogramming transmitters

To reprogram the transmitters yourself, place the key in the ignition and

turn from OFF to ON eight times in rapid succession (within 10 seconds)

ending in the ON position. After doors lock/unlock, press any control on

all transmitters (up to four). With each control press of the transmitters,

the door should cycle (lock/unlock) to confirm programming. When

completed, turn the ignition to OFF. The door locks should cycle

(lock/unlock) one last time to confirm completion of programming.

Autolock (if equipped)

This feature automatically locks all doors when:

• all vehicle doors are closed

• the ignition is in the RUN/START position

• you shift into or through R (Reverse)

Relock

The autolock feature repeats when:

• the ignition is in the RUN/START position

• the vehicle speed is below 5 km/h (3 mph) and any door is opened

then closed

• the vehicle speed exceeds 5 km/h (3 mph)

Deactivating/activating the autolock feature

The autolock/relock feature can be turned off by your dealer.

Deactivating/activating the illuminated exit feature

The illuminated exit feature can be turned off by your dealer.

PERIMETER ALARM SYSTEM (IF EQUIPPED)

The perimeter anti-theft system will help prevent your vehicle from

unauthorized entry.

Controls and features

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 247 248

No comments

Ford 1999 Windstar User Manual Page 99