Ford 2004 Freestar v.3 User Manual download pdf (Page 90)

To adjust the cross-bar (if equipped) position:

1. Loosen the thumbwheel at both

ends of the cross-bar (both

cross-bars are adjustable).

2. Slide cross-bar to the desired

location and tighten the thumbwheel

at both ends of the cross-bar.

To remove the cross-bar (if equipped) assembly:

1. Loosen the thumbwheel (2) at both ends of the cross-bar (1) and

slide the cross-bar (1) to the end of the side rails (4).

2. Remove the two thumbwheels (2), clamps (3) and cross-bar (1) from

the side rails (4).

To install the cross-bar (if

equipped) assembly:

Note: Ensure that both cross-bars

are installed with the arrow, located

on the bottom of the cross-bar end,

facing towards the front of the

vehicle.

1. Position the cross bar (1) on the

side rails (4) with the arrow facing

towards the front of the vehicle.

2. Align the clamps (3) under the side rails (4) and install the

thumbwheels (2) through the cross bar (1) and side rails (4) into the

clamps (3). Repeat steps 1 and 2 to install the other cross-bar.

Note: When the cross-bars are not in use, remove or move the

cross-bars to the back of the roof rack for optimum wind noise.

2004 Freestar (win)

Owners Guide (post-2002-fmt)

USA English (fus)

Driver Controls

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 295 296

No comments

Ford 2004 Freestar v.3 User Manual Page 90