Ford 2008 E-450 v.3 User Manual download pdf (Page 238)

5. Locate and carefully remove the

engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

• If the oil level is between the lower and upper holes or between

the MIN and MAX marks (depending on application), the oil

level is acceptable. DO NOT ADD OIL.

• If the oil level is below the lower

hole or the MIN mark, add

enough oil to raise the level

within the lower and upper holes

or within the MIN-MAX range.

• Oil levels above the upper hole or the MAX mark may cause engine

damage. Some oil must be removed from the engine by an authorized

dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

238

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 238