Ford 2008 E-450 v.3 User Manual download pdf (Page 76)

4. With assistance, pull the LH/RH seat latch release straps (1) (located

behind the latch mechanisms) to release the latch from the rear strikers.

5. Lift the rear end of seat upward and rearward by pushing on the

seatback (2) and lifting the seat cushion (3) to disengage the front seat

hook and the rear seat latch from the striker.

6. With assistance, remove the seat assembly.

• To remove the 3rd, 4th, and 5th row seats (if equipped), repeat

Steps 1 through 6.

To install the seat:

WARNING: Ensure that the seat is installed or removed from

the striker pins with adequate ergonomic assistance. Due to the

weight of the seat, it must be handled by at least two adults during

installation or removal from the vehicle.

WARNING: Ensure that the seat is latched to the vehicle floor

by pushing/pulling on the seat or seatback (2). If not latched,

the seat may cause injury during a sudden stop.

1. Please make sure the floor striker area is clean of any debris that

would prevent the seat from latching.

2. With assistance, position the seat in the vehicle.

3. Align the front hooks to the LH/RH front striker pins prior to lowering

the rear latch mechanism and aligning them with the rear striker pins.

4. Engage the front LH/RH hooks to the LH/RH front striker pins.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 76