Ford 2008 E-450 v.3 User Manual download pdf (Page 43)

4. Remove the bulb assembly by

turning it counterclockwise and

pulling it straight out.

WARNING: Handle a halogen headlamp bulb carefully and keep

out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the

bulb to break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with

alcohol before being used.

To install the new bulb, follow the removal procedures in reverse order.

Replacing headlamps (sealed beam)

1. Make sure the headlamp switch is in the off position and open the

hood.

2. Remove the four screws from the

top and bottom front of the

headlamp assembly and carefully

remove the lamp/bezel.

3. Remove the four screws and the

retaining ring.

4. Disconnect the electrical

connector from the lamp and

remove the lamp.

To install the new lamp, follow the

removal procedures in reverse order.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the off position.

2. Remove the headlamp assembly, refer to Replacing headlamp bulbs

in this section.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 43