Ford 2014 Escape v.4 User Manual download pdf (Page 224)

5. Locate the vertical adjuster on each

headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise or counterclockwise in order

to aim the headlamp. The horizontal

edge of the brighter light should touch

the horizontal reference line.

6. Close the hood and turn off the lamps.

Vehicles With High Intensity Discharge

Headlamps

1. Park the vehicle directly in front of a

wall or screen on a level surface,

approximately 25 feet (7.6 meters)

away.

2. Measure the height of the headlamp

bulb center from the ground and mark

an 8 foot (2.4 meter) horizontal

reference line on the vertical wall or

screen at this height.

Note: To see a clearer light pattern for

adjusting, you may want to block the light

from one headlamp while adjusting the

other.

3. Turn on the low beam headlamps to

illuminate the wall or screen and open

the hood.

E142466

4. There is a distinct cut-off (change from

light to dark) in the left portion of the

beam pattern. The top edge of this

cut-off should be positioned two

inches (5 centimeters) below the

horizontal reference line.

E142467

5. Locate the vertical adjuster on each

headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise or counterclockwise in order

to aim the headlamp.

6. Close the hood and turn off the lamps.

Horizontal Aim Adjustment

Horizontal aim is not required for this

vehicle and is non-adjustable.

REMOVING A HEADLAMP

2

2

E142468

1. Make sure the headlamp control is in

the off position and open the hood.

2. Remove the two screws from the

headlamp assembly.

221

Escape (TM2) , enUSA

Maintenance

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 433 434

Comments to this Manuals

No comments