Ford 2014 Escape v.4 User Manual download pdf (Page 226)

1. Remove the headlamp.

2. Remove service cap.

3. Disconnect the electrical connector.

4. Remove bulb from the headlamp

assembly by turning it

counterclockwise, then pull it straight

out.

Low beam headlamp:

2 4

E142471

1. Remove the headlamp.

2. Remove service cap.

3. Disconnect the electrical connector.

4. Remove bulb from the headlamp

assembly by turning it

counterclockwise, then pull it straight

out.

Install the new bulbs in reverse order from

the steps above. Be sure that the spring

clip is not damaged or detached from the

headlamp assembly during the

replacement procedure.

Replacing HID Headlamp Bulbs (If

Equipped)

The low beam headlamps on your vehicle

use a high intensity discharge source.

These lamps operate at a high voltage.

When the bulb is burned out, the bulb and

starter capsule assembly must be replaced

by your authorized dealer.

Replacing Side Marker Bulbs

E142472

1. Remove the bulb socket from the

headlamp assembly by turning it

counterclockwise.

2. Remove the bulb by gently pull the

bulb straight out of the socket.

Install the new bulb in reverse order.

Replacing Fog, Park and Turn

Signal Bulbs

A B C

E142797

Fog LampA

Park LampB

Turn Signal lampC

223

Escape (TM2) , enUSA

Maintenance

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 433 434

Comments to this Manuals

No comments