Ford 2015 Fusion User Manual download pdf (Page 280)

E144622

4. Adjust the tire to the recommended

inflation pressure from the tire label

located on the driver door or door jamb

area. The tire pressure has to be

checked with the compressor in the

OFF position to get the correct tire

pressure reading.

5. Turn the compressor off by pressing

the on/off button.

6. When the tire pressure reading with the

compressor in the off position is

correct, disconnect the hose, re-install

the valve cap on the tire valve, unplug

the compressor, and return the kit to

the stowage area.

What to do after the Tire has been

Sealed

After using the kit to seal your tire, you will

need to replace the sealant canister and

clear tube (hose). You can obtain and

replace sealing compound and spare parts

at an authorized Ford dealer or tire dealer.

Empty sealant bottles may be disposed of

at home. However, liquid residue from the

sealing compound should be disposed by

your local Ford Motor Company dealer or

tire dealer, or in accordance with local

waste disposal regulations.

Note: After the sealing compound has been

used, the maximum vehicle speed is 50 mph

(80 km/h) and the maximum driving

distance is 120 mi (200 km). The sealed tire

should be inspected immediately.

Note: After sealant use, the tire pressure

monitoring system sensor and valve stem

on the wheel must be replaced by an

authorized Ford dealer.

You can check the tire pressure any time

within the 120 mi (200 km) by performing

the procedure from Second stage:

Checking tire pressure listed previously.

Removal of the sealant canister from

the kit

E144623

1. Unwrap the clear tube from the

compressor housing.

E144624

2. Locate the yellow cap at the end of the

clear tube.

277

Fusion/Mondeo (CC7), enUSA

Wheels and Tires

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 487 488

Comments to this Manuals

No comments