Ford 2003 Windstar v.1 User Manual download pdf (Page 135)

brake pedal pulsation may be observed during ABS braking; any

pulsations or mechanical noise you may feel or hear is normal.

ABS warning lamp

ABS

The

ABS

lamp in the instrument cluster momentarily illuminates when

the ignition is turned to ON. If the light does not illuminate during start

up, remains on or flashes, the ABS may be disabled and the ABS may

need to be serviced.

Even when the ABS is disabled,

normal braking is still effective. (If

your BRAKE warning lamp

illuminates with the parking brake

released, have your brake system serviced immediately.)

Using ABS

When hard braking is required, apply continuous force on the brake

pedal; do not pump the brake pedal since this will reduce the

effectiveness of the ABS and will increase your vehicle’s stopping

distance. The ABS will be activated immediately, allowing you to retain

full steering control during hard braking and on slippery surfaces.

However, the ABS does not decrease stopping distance.

Parking brake

To set the parking brake, press the

parking brake pedal down until the

pedal stops. The BRAKE warning

lamp will illuminate and will remain

illuminated until the parking brake

is released.

To release, press and hold the

button, pull the handle up slightly,

then push the handle down.

Always set the parking

brake fully and make sure

that the gearshift is securely

latched in P (Park).

TRACTION CONTROL姟 (IF EQUIPPED)

Your vehicle may be equipped with a Traction Control娂 system. This

system helps you maintain the stability and steerability of your vehicle,

Driving

135

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 239 240

No comments

Ford 2003 Windstar v.1 User Manual Page 135