Ford 2003 Windstar v.1 User Manual download pdf (Page 141)

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.

Always come to a complete stop before shifting into and out of R

(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is

free to roll. Hold the brake pedal down while in this position.

(Overdrive)

The normal driving position for the best fuel economy. The transaxle

operates in gears one through four.

2 (Second)

This position allows for second gear only.

• Provides engine braking.

• Use to start-up on slippery roads.

• To return to

(Overdrive), move the gearshift lever into the

(Overdrive) position.

• Selecting 2 (Second) at higher speeds will cause the transaxle to

downshift to second gear at the appropriate vehicle speed.

1 (First)

• Provides maximum engine braking.

• Allows upshifts by moving gearshift lever.

• Will not downshift into 1 (First) at high speeds; allows for 1 (First)

when vehicle reaches slower speeds.

When parking, do not use the gearshift in place of the parking

brake. Always set the parking brake fully and make sure that the

gearshift is securely latched in Park (P). Turn off the ignition

whenever you leave your vehicle. Never leave your vehicle unattended

while it is running. If you do not take these precautions, your vehicle

may move unexpectedly and injure someone.

If your vehicle gets stuck in mud or snow

If your vehicle gets stuck in mud or snow, it may be rocked out by

shifting from forward and reverse gears, stopping between shifts in a

steady pattern. Press lightly on the accelerator in each gear.

If necessary, try turning the Traction Control娂 or AdvanceTrac娂 system

off. This will allow the wheels to spin, which may help to free your stuck

Driving

141

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 239 240

No comments

Ford 2003 Windstar v.1 User Manual Page 141