Ford 2003 Windstar v.1 User Manual download pdf (Page 68)

displayed on the message center the AdvanceTrac娂 system might be

partially operable. If this warning stays on while the engine is running,

contact your dealer for service as soon as possible. For further

information, refer to AdvanceTrac娂 stability enhancement system in

the Driving chapter.

CHANGE OIL SOON/OIL CHANGE REQUIRED. Displayed when the

engine oil life remaining is 5 percent or less. When oil life left is between

5% and 0%, the CHANGE OIL SOON message will be displayed. When oil

life left reaches 0%, the OIL CHANGE REQUIRED message will be

displayed.

An oil change is required whenever indicated by the message center.

USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change

[approximately 8 000 km (5 000 miles) or 180 days] perform the

following:

1. Press the SETUP control to

access the System Check function.

2. Press and release the RESET

control to display “OIL LIFE XX%

HOLD RESET NEW”.

3. Press and hold the RESET

control for 2 seconds to display “IF

NEW OIL HOLD RESET”.

4. Press and hold the RESET

control to display “OIL LIFE SET

TO 100%”. Your oil life is now reset.

Driver Controls

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 239 240

No comments

Ford 2003 Windstar v.1 User Manual Page 68