Ford 2003 Windstar v.1 User Manual download pdf (Page 42)

Replacing front parking/turn signal bulbs

1. Make sure the headlamp switch is

in the OFF position and open the

hood.

2. Pull the two headlamp retainer

pins up to release the headlamp

assembly, then pull the headlamp

assembly forward to expose the bulb

socket.

3. Remove bulb socket by turning it

counterclockwise, and pull the bulb

straight out of the socket.

Install the new bulb(s) in reverse order.

Replacing tail lamp/backup/turn lamp bulbs

1. Make sure the headlamp switch is

in the OFF position and open the

liftgate to expose the tail lamp

assembly, then remove the retaining

screws for the lamp assembly.

2. Carefully remove the lamp

assembly.

3. Rotate bulb socket

counterclockwise and remove from

lamp assembly.

4. Pull bulb straight out of socket and push in new bulb.

Install the new bulb(s) in reverse order.

Lights

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 239 240

No comments

Ford 2003 Windstar v.1 User Manual Page 42