Ford 2005 Focus v.1 User Manual download pdf (Page 31)

High beams

Pull the lever towards you to

activate. Pull the lever towards you

again to deactivate.

Flash to pass

Pull toward you slightly to activate

and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the

instrument panel during headlight

and parklamp operation.

• Rotate the thumbwheel from left

to right to brighten the

instrument panel.

• Rotate the thumbwheel from right to left to dim the instrument panel.

VERTICAL AIM ADJUSTMENT

1. Park the vehicle on a level surface directly in front of a vertical wall or

screen, approximately 7.6 meters (25 feet) away.

2. Measure the height of the headlamp bulb center from the ground and

mark a 2.5 meters (8 foot) horizontal reference line on the vertical wall

or screen at this height. (A piece of masking tape works well.)

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood.

4. On the wall or screen you will observe an area of high intensity light.

The top of the high intensity area should touch the horizontal reference

line. If not, the beam will need to be adjusted.

2005 Focus (foc)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 223 224

No comments

Ford 2005 Focus v.1 User Manual Page 31