Ford 2005 Focus v.1 User Manual download pdf (Page 74)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

Ford Motor Company recommends that all passenger safety belt

assemblies and attaching hardware should be inspected by a

qualified technician after any collision to verify that the ⬙automatic

locking retractor⬙ feature for child seats is still working properly. Safety

belt assemblies should be inspected according to the procedures in the

Workshop Manual and must be replaced if either damage or improper

operation is noted. Failure to replace the belt and retractor assembly

could increase the risk of injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

front outboard passenger seating positions.

The safety belt pretensioner is a device which removes excess webbing

from the safety belt system. The safety belt pretensioner uses the same

crash sensor system as the front air bag supplemental restraint system

(SRS). When the safety belt pretensioner deploys, webbing from the lap

and shoulder belt is tightened. The driver and front passenger seat belt

system (including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in

deployment of front air bags and safety belt pretensioners. Refer to the

Safety belt maintenance section in this chapter.

2005 Focus (foc)

Owners Guide (post-2002-fmt)

USA English (fus)

Seating and Safety Restraints

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 223 224

No comments

Ford 2005 Focus v.1 User Manual Page 74