Ford 2005 Focus v.1 User Manual download pdf (Page 61)

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock娂 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your dealer to have the spare key(s)

programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 2 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least one second, but no

more than 10 seconds.

3. Turn the ignition to the 2 (OFF) position.

4. Remove the previously programmed coded key from the ignition.

5. Within ten seconds of removing the previously programmed coded key,

insert the other previously programmed coded key into the ignition.

6. Turn the ignition from the 2 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least one second but not

more than 10 seconds.

7. Turn the ignition to the 2 (OFF) position.

8. Remove the previously programmed coded key from the ignition.

9. Within twenty seconds of removing the previously programmed coded

key, insert the unprogrammed key (new/valet key) into the ignition.

10. Turn the ignition from the 2 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least one second, but no

more than 10 seconds.

11. Your new, unprogrammed key is now programmed.

If the key has been successfully programmed it will start the vehicle’s

engine and the theft indicator light will illuminate for three seconds and

then go out.

2005 Focus (foc)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 223 224

No comments

Ford 2005 Focus v.1 User Manual Page 61