Ford 2008 E-450 v.3 User Manual download pdf (Page 104)

5. To put the retractor in the

automatic locking mode, grasp the

shoulder portion of the belt and pull

downward until all of the belt is

extracted.

6. Allow the belt to retract. The belt will click as it retracts to indicate it

is in the automatic locking mode.

7. Pull the lap belt portion across

the child seat toward the buckle and

pull up on the shoulder belt while

pushing down with your knee on the

child seat.

8. Allow the safety belt to retract to

remove any slack in the belt.

9. Before placing the child in the

seat, forcibly tilt the seat forward

and back to make sure the seat is

securely held in place. To check

this, grab the seat at the belt path

and attempt to move it side to side

and forward and back. There should

be no more than one inch (2.5 cm)

of movement for proper installation.

10. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more belt

out). If the retractor is not locked, unbuckle the belt and repeat Steps 2

through 9.

Check to make sure the child seat is properly secured before each use.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

104

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 104