Ford 2008 E-450 v.3 User Manual download pdf (Page 192)

100

101

On commercial stripped chassis

vehicles, this switch is located on a

bracket above the brake pedal.

To reset the switch:

1. Turn the ignition OFF.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the

switch by pushing in on the reset

button.

4. Turn the ignition ON.

5. Wait a few seconds and return

the key to OFF.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the

vehicle are not working, a fuse may

have blown. Blown fuses are

identified by a broken wire within

the fuse. Check the appropriate

fuses before replacing any electrical

components.

Note: Always replace a fuse with one that has the specified amperage

rating. Using a fuse with a higher amperage rating can cause severe wire

damage and could start a fire.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

192

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 284 285

Comments to this Manuals

No comments

Ford 2008 E-450 v.3 User Manual Page 192

Comments to this Manuals

Related products and manuals for Cars Ford 2008 E-450 v.3