Ford 2008 E-450 v.3 User Manual download pdf (Page 267)

High fluid level

Fluid levels above the safe range may result in transmission failure.

An overfill condition of transmission fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick. Refer to Maintenance

product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid should be removed by an authorized

dealer.

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

267

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 267