Ford 2008 E-450 v.3 User Manual download pdf (Page 46)

Replacing license plate lamp bulbs

1. Turn the headlamp switch to the

off position.

2. Remove the two screws and the

license plate lamp assembly from

the rear door.

3. Remove bulb socket from lamp

assembly by turning

counterclockwise.

4. Pull the bulb out from socket and

push in the new bulb.

To install the new bulb, follow the removal procedures in reverse order.

Replacing stop/turn/tail/side marker/backup lamp bulbs

The stop/turn/tail/side marker/backup lamp bulbs are located in the tail

lamp assembly. Follow the same steps to replace any of the bulbs:

1. Turn the headlamp switch to the

off position and then remove the

four screws and the lamp assembly

from vehicle.

2. Rotate bulb socket

counterclockwise and remove from

lamp assembly.

3. Carefully pull the bulb straight

out of the socket and push in the

new bulb.

To install the lamp, follow the removal procedures in reverse order.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 284 285

No comments

Ford 2008 E-450 v.3 User Manual Page 46